CLYND Jetted Tub Cleaner
Everything you need to know to keep your jetted tubs running like new. Follow these simple steps for best results.
Step-by-Step Instructions
Follow these simple steps for a deep, thorough clean every time.
Prepare your tub
Ensure your jetted tub is completely empty. This gives the tablet full access to every internal surface and ensures maximum effectiveness.
Add the tablets
Unwrap two CLYND Jetted Tub Cleaner Tabs and drop them into the tub. Make sure they fully submerge and dissolve before moving on.
Activate jets
Turn on the jets and set them to their maximum setting. Let them run for 15–20 minutes. The force of water combined with the dissolving tablets works to break up deposits, scale, oily residue, and biofilm buildup inside the plumbing.
Drain the tub
After the cleaning cycle, turn off the jets and drain all the water completely. This removes loosened debris.
Refill and rinse
Refill the tub with fresh clean water (same amount as before or at least enough to cover the jets). Run the jets again for 5 minutes—this flushes out any remaining cleaning solution or residue.
Final drain & wipe
Drain the tub again. Use a clean towel or microfiber cloth to wipe all accessible surfaces—jet ports, tub bottom, sides. Make sure you remove any moisture, residue, or film.
SAFETY GUIDELINES
CLYND Jetted Tub Cleaner Tabs are formulated with eco-conscious ingredients. Still, keep unused tablets out of reach of children and pets.
Always follow the recommended dosage (two tablets per full cleaning). Overuse won’t improve results and may waste product.
Do not combine with bleach, vinegar, or other bathtub cleaners. Mixing products can reduce effectiveness or create unsafe reactions.
The formula is gentle, but if you have sensitive skin, use gloves when handling tablets or wiping down the tub.
Maintenance Best Practices
Clean your jetted tub every 1–3 months, depending on frequency of use. More frequent cleaning is recommended if you use bath oils, salts, or bubble baths, which can increase residue.
After each bath, quickly rinse and wipe visible surfaces. This prevents soap scum buildup and reduces the workload of your deep clean.
Inspect jets periodically for visible residue. If buildup persists, gently scrub with a soft brush during your regular wipe-down.
Hard water can accelerate scale buildup. If you live in an area with hard water, consider monthly cleaning instead of quarterly.
After draining, wipe surfaces dry with a towel or microfiber cloth. This simple habit helps prevent mildew and water spots.
Avoid leaving standing water in the tub for long periods—it encourages bacteria and mineral deposits inside the plumbing.