CLYND Mold Stain Remover Gel
Everything you need to know to keep tiles and surfaces sparkling clean and new. Follow these simple steps for best results.
Step-by-Step Instructions
Follow these simple steps for a deep, thorough clean every time.
Preparation
Always wear gloves and protective eyewear before handling the product. Ensure the target surface is completely dry and free from loose dirt or debris.
Application
Squeeze the gel directly onto the surface, ensuring all dirty or discolored areas are fully covered.
Let it Sit
Allow the gel to sit for 3–5 hours until it has hardened. For deep-seated or stubborn stains, leaving the product on longer (such as overnight) is often required.
Wipe the surface
Use a damp cloth or sponge to wipe away the hardened gel, then rinse the area thoroughly with clean water.
Let it dry
Let the treated area air-dry completely before making skin contact or using the appliance/fixture.
PRO TIPS FOR MAXIMUM EFFICIENCY
For heavily discolored areas, apply a more generous amount of gel. Lightly scrubbing the area with a soft brush before the dwell period can help the formula penetrate deeper.
When treating tile grout or caulking, apply the gel directly onto the line. Avoid getting excess gel on nearby metal or ceramic surfaces to prevent potential damage.
Applying the gel to a wet surface is a common failure point; moisture acts as a barrier that prevents the gel from adhering and penetrating effectively.
Because the gel is transparent, you can monitor the progress. If the stain is still visible after 5 hours, let it sit longer until the black spots have completely faded.
SAFETY GUIDELINES
This product may be corrosive to metals and harmful if swallowed. It causes severe skin burns and eye damage.
Never use this product without protective gloves and eyewear.
Contact Poison Control or emergency services immediately. Donotinduce vomiting.
If on skin, wash thoroughly with soap and water. If in eyes, rinse continuously with water for several minutes and remove contact lenses if applicable.
Move the person to fresh air immediately; seek medical help if breathing is difficult.
Maintenance Best Practices
After each use, remove the applicator nozzle and rinse it with water to prevent the gel from hardening and clogging the tip.
Always replace the original bottle cap for long-term storage. Storing the bottle with the applicator nozzle attached can lead to the product drying out or leaking.
Do not mix this gel with other household cleaners, especially those containing ammonia, to avoid dangerous chemical reactions.